All sensors and signals can be connected

The Mitec AT40's uniqueness lies in its flexibility and the ability to connect many different types of external signals and measuring sensors.

Signal inputs are fully universal which means that each of the eight channels can handle virtually any type of signal, in any combination. AT40g checks which sensors are in use and adapts automatically.
The most common types are analog signals from measuring sensors and instruments, pulses from flow and energy and other meters, status signals (on/off) as well as time measurements.

Mitec SmartCable™

Mitec SmartCables are used to connect signals and sensors to the AT40g logger. The SmartCable triggers the logger to scale the input signal and process information with the correct magnitude and unit, using a range of languages.
No external "interface boxes" are needed and it is not necessary to remember any scale factors. Connect the cable to an input and the installation is complete
Around 700 different sensors, signals and instruments can currently be connected, and the range is continually expanding. SmartCables can also be used with Mitec AT40 and AT31 loggers.

Measurements with AT40g

Sensors for the following measurements can be connected directly to AT40g.

Angle
Bridge sensors
CH
CO2
Conductivity
Current AC/DC
Current clamp
Dew point
Dust conc.
Electrical field
Electricity meter
Flow
Frequency
Humidity
H2S
Hg
Light
Magnetic ind.
Mass
NH3
NO2
Noise
O2
Operating time
Oxy-meter

pH
Position
Power
Power factor
Pressure
Pulses
Pyrometer
Rainmeter
Resistance
Revolutions
Rotor position
Speed
Status
Temperature
Temp. Pt100
Temp. Pt1000
Temp. thermistor
Thermocouple J
Thermocouple K
Thermocouple T
Thermocouple N
Thermocouple S
UV-light
Voltage AC / DC
Volume

Mitec Instrument AB

Visit/Delivery:
Välsviksleden 208, SE-656 39 Karlstad, Sweden
Phone: +46 70-624 08 80
E-mail: info@mitec.se